Button to Button Duplicable Remote_4 Button with Switch

It is with switch, can turn the switch to "OFF" in case press the button by carelessly. And Turn to "ON" when need.

User manual for duplicable remote with switch

It can be used for many cars. It can duplicate the remotes with the following IC code:

1. HT-12E 2.AX5326-3 3.AX5326-4 4.AX5026 5.PT2262 6.PT2242 7.HT600 8.HT680 9.HT6207 10.HT6010 11.HT6012 12.HT6014 13.MC145026 14.HT640 15.EV1527 16.EV527 17.PT2260

• Format Remote: Press Lock and Unlock buttons at the same time. After 2S, the LED light will be off after a fast flash. Keep pressing the Lock button, press the Unlock button 3 times (1,2,3) must finish the 3 pressing within 3 seconds, then the LED light will flash very fast, it means the remote has been formatted, and is ready to duplicate.

• Duplicate Remote: Old remote in left hand, this remote in right hand, make them close, the closer the better, the best is to make them back to back. Press both Lock buttons at the same time, after 3 seconds, the Led light will flash fast, it means the Lock button has been copied successfully. Do in the same way for other 3 buttons.
• Recovery: If you format the remote by carelessly, you can press Lock button and the PANIC button at the same time, after 3 seconds, the LED light will flash 3 times, and then flash fast continually, it mean the remote has been recovered.
• Hits: Its frequency is adjustable from 280mhz-490mhz, please use the special non mental pen to adjust the frequency, and make sure the mobile phone or other sensitive electronics are away from the remote.