Transponder Programmer

Transponder Programmer

Main Features:

1. Read transponder
2. Write on transponder
3. Copy transponder
4. Usable with PC software
5. Unlimited transponder data save
6. Language selection
7. It can detect, read and duplicate (using an appropriate key blank) Philips, Megamos, Temic and Texas transponders:

Reads fixed code transponders:
Philips PCF7930/31 - Silca 33, 73
Philips PCF7935 40,41,42,44,45
Temic-Silca 11 i 12
Megamos - Silca 13
Silca T5
Texas - Silca 4C

Recognises :
Megamos crypto - Silca 48,
Philips crypto - Silca 46,
Texas crypto 4D,
Fixed 11, 12, 13, 33, 73, 4C, T5
Crypto 40, 41, 42, 44, 45, 4D, 48
Rolling + Crypto 46

• 8E

• 8C

Copies:
11, 12 Temic
13 Megamos
33, 73 Philips
4C Texas
4D Texas crypto (Need to purchase the 4D clone box extra.)
T5 Nova

GENERAL OPERATION

READING
1. Insert key into the key reader.
2. Press the R button.
3. The transponder information will be displayed.
NOTE: If the transponder is locked LCK is displayed in the bottom left corner.

WRITING WITH THE KEYPAD

1. Clear display by pressing R with no transponder in the key reader.
2. Insert the key/transponder to be written into the key reader.
3. Select required transponder type by pressing the W button then press ENTER to confirm.
4. Type in the required code - press the W button to move the curser to the right and the R
button to move the curser to the left.
5. Press ENTER then press W.
6. Select the required transponder by pressing the relevant number on the transponder programmer.
7. If WRITE ERROR is displayed check the transponder type and try again.

Packing List:

1. Transponder Programmer

2. Power Cable with 2 outlets

3. CD with the PC Software and user manual

4 High quality COM 9pin to USB port and its dirver CD, suitable for all the computers.

5. The aluminum case for packing

Operation is also easy and clear by using the PC software